Canon.com/ijsetup
Setup For canon.com/ijsetup
To get started with canon printer you will need the following:
• The printer
• Required cables
• Ink cartridges
• Paper
• A computer
• An internet connection
Hardware Setup For canon.com/ijsetup
1. First of all, www.canon.com/ijsetup requires you to place your Canon Printer on a flat, stable location. Additionally, ensure that it is within your Router’s Signal Range.
2. Now, unbox the Printer carefully and remove the packaging material.
3. Next, you should clear the printer from the tapes pasted on all parts without damaging the printer.
4. Then, set its Paper Tray and load it with specified A4 size plain white sheets.
5. Thereafter, connect it to a stable Power Source like a Wall Socket using the accompanying Power Cord. Then, switch it On.
6. After that, turn On the Printer by pressing its Power button located on its top. Consequently, its “Power Lamp” will light up. Hence, ensure that it must be stable.
7. At the same time, canon.com/ijsetup will begin the Printer’s initialization process automatically. You may hear some noise at this point. Hence, wait for the process to finish.
8. Subsequently, the Printer’s Display Panel will light up and begin the Setup Guide. As such, follow the on-screen prompts to complete the initial setup procedures for canon.com/ijsetup. For this, carefully select “Display Language”, “Country/ Region”, “Date”, “Time”, and “Access Security Measures (PIN)”.
9. At last, select “End” to exit the Setup Guide for canon.com/ijsetup.
Printer Configuration for canon.com/ijsetup
Wireless Configuration for canon.com/ijsetup depends largely on your Printer and Router’s Infrastructure. However, the following method can be used with most of the Canon printers.
1. Therefore, begin the process by turning on your “Network Access Point” or “Router”. At the same time, ensure that it is functioning properly.
2. In addition to that, ensure that your computer is also connected to the same “Network”.
3. Besides that, ensure that your Printer is turned on. You should check its Power Lamp. It must be lit and stable.
4. Now, begin the canon.com/ijsetup process by accessing the printer’s “Operational Panel”. Its Display Screen must show its “Home” window. However, if that is not the case. Then, check its “Energy Saver” button with a “Sleep Mode” icon. In case if it is lit. Then, “Wake” the printer by pressing this button. Then, press the “Home” button.
5. After this, navigate the “Display Panel” to locate the “Menu” tab. Then, tap on it and open the “Menu” window.
6. Next, you should tap on the “Preferences” tab to expand it.
7. Thereafter, tap on “Network”.
8. The following window requires you to “Log In”. Therefore, provide the printer’s “System Manager Login ID and PIN/ Password”. Then, tap on the “Login” tab.
9. After that, tap on the “Wireless LAN Settings” option to proceed with canon.com/ijsetup.
10. Then, tap “Yes” to enable wireless LAN.
11. Subsequently, read the message providing details of the wireless LAN option. Then, tap “OK”.
12. Now, select “SSID Settings” by tapping on it. In other words, you are opting for “Wireless LAN Setup” using SSID i.e. the name of the wireless network.
13. Next, you should tap “Select Access Point” to choose the most convenient canon.com/ijsetup method. In other words, your Canon Printer will locate and connect to your network automatically.
14. At this point, the Printer will start looking for the available Networks for connection.
15. Consequently, you will get a list of all the networks (Routers) available within the range.
16. Therefore, select your “SSID” or “Network/ Router Name”. Then, tap “Next”.
17. After that, it will prompt you to confirm your choice. Hence, tap on “OK”.
18. Subsequently, type in your “Network Password” very carefully. For this, use the “Up” arrow key to switch between the “Upper” and “Lowercase”. In addition to that, use the “Symbol” key to enter “Numbers” and “Symbols”.
19. At last, tap “Apply”.
20. On the following message window, tap “Yes” after reading the same.
21. As such, canon ij setup will connect the Canon Printer to your Network. However, this may take time. Hence, wait for the process to complete.
22. On the following “Connected” message screen, tap “Close” to exit.
23. Thereafter, canon.com/ijsetup will set the IP address and other details automatically on your Canon Printer. Hence, wait for a few more minutes.
